| Body material : | Aluminum Alloy+PC cover |
| Power supply: | The solar panel(Monocrystalline 2.5V /120MA) |
| Battery: | Lithium battery 1000MAH*3.2V |
| LED: | Ultra-bright diameter 5mm*6PCS |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 140 hrs for flashing modes,40hrs for constant modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >30T(can be installed in the middle of the road) |
| Size: | Ф123*45mm |
| Weight： | 30kgs/ctn,30pcs/ctn |
| Life span: | more than 5 years |
| Working Temperature | -20 °C~ + 70°C |
| waterproof | IP68 |
LED-ENHANCED WARNING ALERTS. LegendViz™ Traffic Signs feature highly visible, LED-illuminated legends for improved visibility at night. They are shown to increase sign legibility distance by as much as 100 percent compared to standard traffic signs, according to the results of a closed-course driver trial and statistical analysis conducted by
At interchanges, roads pass above or below each other, using grade separation and slip roads.The terms motorway junction and highway junction typically refer to this layout. They can be further subdivided into those with and without signal controls. Signalized (traffic-light controlled) interchanges include such "diamond" designs as the diverging diamond, Michigan urban
IREL-L / ICAO 60 m - LED In-pavement Runway Edge, High-Intensity - 12". The IREL-L Style 2 LED Runway Edge Light is used in runway edge applications on Category I, II, and III runways. It is also used in military runway edge applications that are 60 m (200 feet) wide or more.
2 and 3-way signs are an efficient way to mark emergency routes and equipment as you can install a single sign instead of multiple signs at different angles. 2-way signs provide bi-directional viewing while 3-way signs give 180 degrees of visibility. Both can be installed with foam adhesive as well as mounting holes on flange for added stability.
The best roadway Internally Illuminated Recessed Pavement Markers (IIRPM) lights in the business, they offer years of reliable, cost-effective roadway safety. Made of virtually indestructible cast aluminum, they are rated and fabricated to withstand heavy vehicles and even snowplows. Ideal for curved roads, rural traffic and as lane delineation.
Light-Emitting Diode (LEDs) have been applied as a new type of luminaire in tunnel lighting in recent years, but at present, there are few studies on the influence of color rendering of LEDs on
The in-pavement Lane Lights are ideal for dynamic delineation lane marking. These ultra-flat road markers combine robust design and mechanical resistance with luminous excellence, flexible switch and flash mode with low energy consumption. Uni and bi-directional light output available with day time visibility LEDs perfect for your motorway solution
Home » Products » Bidirectional Solar Road Studs Pavement Marker C3. Bidirectional Solar Road Studs Pavement Marker C3 . Load Bearing: >30T(static) Warranty: 12 Months Body material: Heavy-duty casting aluminum Battery: Lithium battery 1000mA Visual distance: ＞ 800m Working Mode: Flashing or Constant
4 ft heavy-duty, reflective bi-directional posts return to an upright position, even after being struck. Best quality and selection. Fast shipping. 60 years of satisfied customers.
The ultra-high LED light in the solar raised pavement markers with a diameter of 5 mm ensures optimal visibility. Solar raised pavement markers help reduce the impact on the environment. Provide guidance and danger warnings to drivers in the dark and in bad weather. cast aluminum housing increases load capacity to more than 20 T.
The durability performance of the presented innovative GiD based raised pavement markers has been presented along with cost comparison to traditional Bott’s dot. with extensive wind tunnel ...
Welcome to the California Purchasing Group! Register for extensive access to statewide RFPs, bids and awards throughout California. Registered vendors benefit from more state and local government bid information in a central location, less paperwork and an easier method of doing business with California state & local governments.
Jul 01, 2021 · Lemke (2000) found that property damage only crash rates in Germany were the highest in tunnel freeways without shoulder lanes and injury accident rates were the highest in bi-directional tunnel highways. Amundsen and Engebretsen (2009) drew similar conclusions in their accident analysis of Norwegian road tunnels from 2001 to 2006. In their
¡ Solar Pavement Markers¡± is nothing but an ¡ Active Road Stud¡± with automatic switching function, realized using the combination of a small solar panel, re-chargeable cell, and LED driver They are ideal for pedestrian crossings, speed humps and as Solar
Solar Aluminum Road Stud, Road Marker with Light (SKT-05) US $ 3.9-5.9 / Piece FOB. MOQ: 50 Pieces. Since 2016. Main Products. Reflector, Motorcycle LED Lamps, Road Markers, Vehicle Lamps, Trailer LED Lamps, Pedestrian Reflector, Light Guide Strip, Road Stud, Auto Parts, Headlamp. Contact Supplier.
